Microscan MS-2 User Manual download pdf (Page 68)

5-6 MS-2 CCD Reader User’s Manual

Codabar

Start/Stop Output Status (Codabar)

Symbol Length Status (Codabar)

Usage: Used in photo-finishing and library applications. Previously used in medical

applications, but not typically used in newer medical applications.

Definition: Codabar is a 16-bit character set (0 through 9, and the characters $, :, /, .,

+, and –) with start/stop codes and at least two distinctly different bar

widths.

Serial Cmd: <K471,status,0,start/stop output status,0,symbol length status,symbol

length,check character status,check character output>

Default: Disabled

Options: 0 = Disabled 1 = Enabled

Definition:

When enabled, the start and stop characters will be present in the data output

of the decoded symbol.

When disabled, the start and stop characters will not be present in the data

output of the decoded symbol.

Note: Because the start and stop characters are included as part of the

data, the characters must be included as part of the length in a fixed length

mode of operation.

Serial Cmd: <K471,status,0,start/stop output status,0,symbol length status,symbol

length,check character status,check character output>

Default: Enabled

Options: 0 = Disabled 1 = Enabled

Definition: When set to Any/Minimum, any symbol length is considered valid.

When set to Fixed, the reader will check the symbol length against the

Symbol Length Status parameter.

Serial Cmd: <K471,status,0,start/stop output status,0,symbol length status,symbol

length,check character status,check character output>

Default: Any/Minimum

Options: 0 = Any/Minimum 1 = Fixed

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 124 125

No comments

Microscan MS-2 User Manual Page 68